Advantech EKI-9316P Series User Manual page 279

The following table describes the items in the previous menu.
Table 3-213. Maintenance > Upload
Parameter
File Type
Transfer Mode
Server Address Type Click the drop-down menu to select either IPv4 or IPv6 or DNS to indicate the for-
Server Address
Transfer File Path
Transfer File Name
User Name
Password
Start File Transfer
File Transfer Status
Submit
Click the drop-down menu to select the type of file you want to upload:
Startup Configuration - Specify Text based configuration when you want to

retrieve the startup script file.
Syslog - Specify syslog to retrieve the system log records.

 Trap Log - Specify trap log to retrieve the system trap records.
Script - Specify Text based configuration when you want to retrieve the script

file.
Mib File - Specify mib file (.zip) to retrieve the mib data of system.

Click the drop-down menu to select the protocol to use to transfer the file.
TFTP - Trivial File Transfer Protocol

SFTP - Secure File Transfer Program

 SCP - Secure Copy
 USB - Universal Serial Bus
mat of the Server Address field. The factory default is IPv4.
Enter the IP address of the server in accordance with the format indicated by the
Server Address Type. The factory default is the IPv4 address 0.0.0.0. The switch
remembers the last server address used.
Enter the path on the server where the selected file has to be located. You may
enter up to 32 characters. The factory default is blank. The switch remembers the
last file path used.
Enter the name of the file you want to upload from the switch to the server. You
may enter up to 31 characters. The factory default is blank. The switch remembers
the last file name used.
Enter the username for remote login to SFTP/SCP server where the file resides.
This field is visible only when SFTP or SCP transfer modes are selected.
Enter the password for remote login to SFTP/SCP server where the file resides.
This field is visible only when SFTP or SCP transfer modes are selected.
Click Start File Transfer to initiate the upload, check this box before pressing the
Submit button.
Click File Transfer Status to display information about the progress of the file trans-
fer.
Click Submit to update the switch with the values on the screen. If you want the
switch to retain the new values across a power cycle you must perform a save.
M
ANAGEMENT
Description
I
NTERFACE
267