Advantech EKI-9316P Series User Manual page 62

M I
ANAGEMENT NTERFACE
The following table describes the items in the previous menu.
Table 3-10. Management > Local Password Management > User Accounts
Parameter
User
User Name
Password
Confirm Password
Access Level
Lockout Status
Password Override-
Complexity Check
Password Expiration
Date
SNMP v3 User Configuration
SNMP v3 Access
Mode
Authentication Proto- Click the drop-down menu to select a SNMP v3 authentication protocol for the
col
Configure Encryption Check the checkbox to allow modifying encryption protocol and encryption key.
Encryption Protocol
Encryption Key
Add
Submit
Delete
50
Click the drop-down menu to configure an existing account or to create a new one.
Up to support five "Read-Only" accounts.
Displays the account name or enter a name for new account. Up to 32 alphanu-
meric characters (not case sensitive) and also the dash ('-') and underscore ('_')
are available. Default is not valid for account name.
Enter a new password or change password (between 8 to 64 characters) for the
account. It only shows asterisks (*) or dots (.) based on the web browser.
The special character as following are available (except " and ?).
~ ` ! @ # $ % ^ & * ( ) _ - + = [ ] { } \ | : ; ' < > . , /
Enter the password to verify. It only shows asterisks (*) or dots(.) based on the web
browser.
Click the drop-down menu to select the user access level. The lowest access level
is "Read-Only", and "Read-Write" is the highest. Only the user has "Read-Write"
level can suspend a user's access.
Displays the user account is locked due to excessive login attempts.
Click the drop-down menu to enable or disable override complexity check. The
default is Disable.
Displays the expiration date of the password.
Displays the SNMP v3 access privileges. Only the admin account has "Read-
Write" access, and other accounts have "Read-Only" access.
selected user account. Specify a password (8 characters) for authentication proto-
col is MD5 or SHA.
Click the drop-down menu to select a SNMP v3 encryption protocol. Select None
and ignore the Encryption Key.
Enter a key (between 8 to 64 characters) to be a SNMP v3 encryption key.
Click Add to create a new user account.
Click Submit to update the screen. To save the values across a power cycle per-
form a system save.
Click Delete to delete a selected user account. To save the values across a power
cycle perform a system save. "Read-Write" user accounts are not deletable.
Description