To access this page, click Management > LLDP > LLDP-MED > Interface Status.
Figure 3-58. Management > LLDP > LLDP-MED > Interface Status
The following table describes the items in the previous menu.
Table 3-56. Management > LLDP > LLDP-MED > Interface Status
Parameter
Interface
Link Status
MED Status
Operational Status
Notification Status
Transmit TLV(s)
Refresh
Local Device Information
Interface Device Information allows for the selection of ports which can transmit LLDP-
MED frames.
Displays all the ports on which LLDP-MED can be configured.
Displays the link status of the ports whether it is Up/Down.
Displays the LLDP-MED mode is enabled or disabled on this interface.
Displays the LLDP-MED TLVs are transmitted or not on this interface.
Displays the LLDP-MED topology notification mode of the interface.
Displays the LLDP-MED transmit TLV(s) that are included.
Click Refresh to update the data on the screen with the present state of the data in
the switch.
M
ANAGEMENT
Description
I
NTERFACE
97