Advantech EKI-9316P Series User Manual page 270

M I
ANAGEMENT NTERFACE
The following table describes the items in the previous menu.
Table 3-203. QoS > Class of Service > Trust Mode Configuration
Parameter
Interface
Interface Trust Mode
Submit
Restore Defaults
Untrusted Traffic
Class
Non-IP Traffic Class
Current 802.1p Prior- Displays the current 802.1p priority mapping configuration.
ity Mapping
258
Click the drop-down menu to select a CoS configurable interface. The option
"Global" represents the most recent global configuration settings. These may be
overridden on a per- interface basis.
Click the drop-down menu to select the policy to trust a particular packet marking at
ingress. Interface Trust Mode can only be one of the following:
untrusted

trust dot1p

 trust ip-dscp
NOTE: Default value is trust dot1p.
Click Submit to update the switch with the values on the screen. If you want the
switch to retain the new values across a power cycle you must perform a save.
Click Restore Defaults to restores default settings.
Displays the untrusted traffic class. When 'untrusted' is selected, this displays traf-
fic class (i.e. queue) to which all traffic is directed when in 'untrusted' mode. Valid
Range is 0 to 6. For an Untrusted interface, packets are handled in accordance
with the user configurable VLAN Priority value of the ingress port.
Displays the non-IP traffic class. When 'trust ip-dscp' is selected, this displays traf-
fic class (i.e. queue) to which all non-IP traffic is directed when in 'trust ip-prece-
dence' or 'trust ip-dscp' mode. Valid Range is 0 to 6.
Description