Table of Contents
Advertisement
Table 3-216. Maintenance > Network Diagnostics > TraceRoute (Continued)
Parameter
TraceRoute
Submit
Displays the results in this format:
1 10.20.24.1 0 ms 0 ms 0 ms
2 66.20.17.9 10 ms 0 ms 10 ms
3 66.20.246.82 10 ms 20 ms 10 ms
4 129.20.4.4 20 ms 10 ms 40 ms
5 129.20.3.55 80 ms 80 ms 90 ms
6 129.20.5.246 80 ms 80 ms 80 ms
7 198.20.90.26 70 ms 70 ms 70 ms
8 216.20.255.105 90 ms 70 ms 80 ms
9 63.20.216.155 80 ms 80 ms 90 ms
Hop Count = 9 Last TTL = 9 Test attempt = 27 Test Success = 27
For each TTL value probed, the results show the IP address of the router that
responded to the probes and the response time for each probe. If no response is
received for probes with a particular TTL, the IP address is reported as 0.0.0.0.
An error code may be printed with the response time for each probe. The
error codes signify that either no response was received or an ICMP
Destination Unreachable message was received with error codes as follows:
* no response was received to the probe
4.
P - Protocol unreachable (RFC 792)
5.
N - Network unreachable (RFC 792)
6.
H - Host unreachable (RFC 792)
7.
F - Fragmentation needed and DF set (RFC 792)
8.
S - Source route failed (RFC 792)
9.
A - Communication with Destination Network is Administratively
Prohibited (RFC 1122)
10.
C - Communication with Destination Host is Administratively Prohibited
(RFC 1122)
Hop Count is the number of sets of probes sent, each set of probes having a
partic-ular TTL.
Last TTL is the TTL sent in the final set of probes.
Test Attempt is the number of probes sent.
Test Success is the number of probes that received a response.
Click Submit to start the traceroute.
Description
M
I
ANAGEMENT
NTERFACE
271
Advertisement
Table of Contents
