Advantech EKI-9316P Series User Manual page 173

Status
The Port Channel Status page displays a summary of the details for each port channel.
To access this page, click Switching > Port Channel > Status.
The following table describes the items in the previous menu.
Table 3-109. Switching > Port Channel > Status
Parameter
Port Channel
Port Channel Name
Port Channel Type
Admin Mode
Link State
STP Mode
Static Mode
Link Trap
Port Channel
Members
Active Ports
Figure 3-112. Switching > Port Channel > Status
Displays the Slot/Port identification of the Port Channel.
Displays the name of the Port Channel.
Displays the type of this Port Channel.
Displays the Administrative Mode of the Port Channel, enable or disable.
Displays the link status: up or down.
Displays the Spanning Tree Protocol Administrative Mode associated with the Port
Channel. The possible values are:
Disable - spanning tree is disabled for this Port Channel.

 Enable - spanning tree is enabled for this Port Channel.
Displays the Static Mode of the Port Channel, enable or disable.
Displays the trap state policy for a status changes. The factory default is Enable.
Displays the ports that are members of the Port Channel, in Slot/Port notation.
There can be a maximum of 8 ports assigned to a Port Channel.
Displays a listing of the ports that are actively participating members of this Port
Channel, in Slot/Port notation. There can be a maximum of 8 ports assigned to a
Port Channel.
M
ANAGEMENT
Description
I
NTERFACE
161