Advantech EKI-9316P Series User Manual page 190

M I
ANAGEMENT NTERFACE
Table 3-122. Multicast > IGMP Snooping > VLAN Status (Continued)
Parameter
Multicast Router
Expiry Time
Submit
Delete
Multicast Router Status
The IGMP Snooping Multicast Router Status displays the multicast router settings for
each interface. To access this page, click Multicast > IGMP Snooping > Multicast
Router Status.
Figure 3-126. Multicast > IGMP Snooping > Multicast Router Status
The following table describes the items in the previous menu.
Table 3-123. Multicast > IGMP Snooping > Multicast Router Status
Parameter
Interface
Multicast Router
Refresh
Multicast Router Configuration
The IGMP Snooping Multicast Router Configuration page allows users to enable or disable
the multicast router for each interface. To access this page, click Multicast > IGMP
Snooping > Multicast Router Configuration.
Figure 3-127. Multicast > IGMP Snooping > Multicast Router Configuration
178
Enter the value for multicast router expiry time of IGMP Snooping for the specified
VLAN ID. Valid range is 0 to 3600 seconds. Default value is 0.
Click Submit to update the switch with the values on the screen. If you want the
switch to retain the new values across a power cycle you must perform a save.
Click Delete to remove created entry.
Click the drop-down menu to select a interface. Select the interface for which you
want to display the status.
Displays for the selected interface whether multicast router is enable or disabled.
Click Refresh to update the data on the screen with the present state of the data in
the switch.
Description
Description