Port Configuration - Advantech EKI-9316P Series User Manual

M I
ANAGEMENT NTERFACE

Port Configuration

The Port Access Control Port Configuration page allows users to configure port access con-
trol. To access this page, click Security > Port Access Control > Port Configuration.
Figure 3-153. Security > Port Access Control > Port Configuration
The following table describes the items in the previous menu.
Table 3-150. Security > Port Access Control > Port Configuration
Parameter
Interface
Control Mode
Quiet Period (secs)
200
Click the drop-down menu to select the port to be configured. When the selection is
changed, a screen refresh will occur causing all fields to be updated for the newly
selected port. All physical interfaces are valid.
Click the drop-down menu to select control mode options. The control mode is only
set if the link status of the port is link up. The options are:
Auto: The authenticator PAE sets the controlled port mode to reflect the out-

come of the authentication exchanges between the supplicant, authenticator,
and the authentication server.
Force Authorized: The authenticator PAE unconditionally sets the controlled

port to authorized.
 Force Unauthorized: The authenticator port access entity (PAE) unconditionally
sets the controlled port to unauthorized.
MAC Based: The authenticator PAE sets the controlled port mode to reflect the

outcome of the authentication exchanges between the supplicant, authentica-
tor, and the authentication server on a per supplicant basis.
Enter the quiet period for the selected port. This command sets the value, in sec-
onds, of the timer used by the authenticator state machine on this port to define
periods of time in which it will not attempt to acquire a supplicant. The quiet period
is the period for which the authenticator does not attempt to acquire a supplicant
after a failed authentication exchange with the supplicant. The quiet period must be
a number in the range of 0 and 65535. A quiet period value of 0 means that the
authenticator state machine will never acquire a supplicant. The default value is 60.
Changing the value will not change the configuration until the Submit button is
pressed.
Description