Advantech EKI-9316P Series User Manual page 160

M I
ANAGEMENT NTERFACE
Table 3-94. Switching > VLAN Setting > Port-based VLAN > Status (Continued)
Parameter
Port Priority
Refresh
Protocol-based VLAN
Configuration
The Protocol-based VLAN Configuration allows the users to configure settings for
protocol-based VLAN. To access this page, click Switching > VLAN Setting > Protocol-
based VLAN > Configuration.
Figure 3-98. Switching > VLAN Setting > Protocol-based VLAN > Configuration
The following table describes the items in the previous menu.
Table 3-95. Switching > VLAN Setting > Protocol-based VLAN > Configuration
Parameter
Group ID
Group ID
Group Name
(Optional)
VLAN
Protocol-list
Interface
148
Displays the set priority of the entry. The default 802.1p priority assigned to
untagged packets arriving at the port.
Refresh the data on the screen with the present state of the data in the switch.
Click the drop-down menu to configure or delete an existing protocol-based VLAN,
or create a new one. Use this pull-down menu to select one of the existing PBV-
LANs, or select 'Create New Group' to add a new one. You can create up to 128
groups.
Enter a value to assign a Group ID.
Enter a value to assign a name to an existing group. You may enter up to 16 alpha-
numeric characters including underscores, hyphens and spaces. Configuring name
for a Group is optional.
Enter a value to assign the VLAN, range 1 to 4093. All the ports in the group will
assign this VLAN ID to untagged packets received for the protocols you included in
this group.
Enter a value to assign the Protocol-list--valid comma(,) separated string with stan-
dard "arp", "ip", "ipx" keywords, hexadecimal or decimal values in the range of
0x0600 (1536) to 0xFFFF (65535).
Select the interface(s) you want to be included in the group. Note that a given inter-
face can only belong to one group for a given protocol. Ex: If you have already
added interface 0.1 to a group for 0x0800, you cannot add it to another group that
also includes 0x0800, although you could add it to a new group for other ethertype
value.
Description
Description