Advantech EKI-9316P Series User Manual page 66

M I
ANAGEMENT NTERFACE
Figure 3-16. Management > Power over Ethernet > Interface Configuration and
Status The following table describes the items in the previous menu.
Table 3-14. Management > Power over Ethernet > Interface Configuration
and Status
Parameter
Interface
Admin Mode
Power Budget (1/10
Watts)
Power Priority
Power Pairs
54
Click the drop-down menu to select a PSE port to apply the settings.
Click the drop-down menu to enable or disable PSE function of the port. The
default is "Enable".
Enter a value (between 150 to 342) to specify the maximum of PSE supply power.
The default is 342.
Click the drop-down menu to select the power-on priority of PSE port.
Click the drop-down menu to select the power-carrying pairs.
 Signal - Supply PD power via 1/2 and 3/6 wire pairs.
 Spare - Supply PD power via 4/5 and 7/8 wire pairs.
Description