Server Status - Advantech EKI-9316P Series User Manual

Table 3-40. Management > Date and Time > Server Configuration (Continued)
Parameter
Version
Submit
Delete

Server Status

The SNTP Server Status displays server information. Users can select the server IP
address from the drop-down menu. To access this page, click Management > Date
and Time > Server Status.
Figure 3-43. Management > Date and Time > Server Status
The following table describes the items in the previous menu.
Table 3-41. Management > Date and Time > Server Status
Parameter
Address
Last Update Time
Last Attempt Time
Last Attempt Status
Enter the NTP Version running on the server. Allowed range is 1 to 4. Default value
is 4.
Press Submit to submit the values on the screen. If you want the switch to retain
the new values across a power cycle you must perform a save.
Press Delete to remove the SNTP Server entry. Sends the updated configuration
to the switch. Configuration changes take effect immediately.
Displays all the existing Server Addresses. If no Server configuration exists, a mes-
sage saying "No SNTP server exists" flashes on the screen.
Displays the local date and time (UTC) that the response from this server was used
to update the system clock.
Displays the local date and time (UTC) that this SNTP server was last queried.
Displays the status of the last SNTP request to this server. If no packet has been
received from this server, a status of other is displayed.
Other - None of the following enumeration values.

 Success - The SNTP operation was successful and the system time was
updated.
Request Timed Out - A directed SNTP request timed out without receiving a

response from the SNTP server.
Bad Date Encoded - The time provided by the SNTP server is not valid.

 Version Not Supported - The SNTP version supported by the server is not com-
patible with the version supported by the client.
Server Unsynchronized - The SNTP server is not synchronized with its peers.

This is indicated via the 'leap indicator' field on the SNTP message.
 Server Kiss Of Death - The SNTP server indicated that no further queries were
to be sent to this server. This is indicated by a stratum field equal to 0 in a
message received from a server.
M
Description
Description
I
ANAGEMENT NTERFACE
83