Advantech EKI-9316P Series User Manual page 153

The following table describes the items in the previous menu.
Table 3-90. Switching > Port Mirroring > Port Mirroring > Add Source Ports
Parameter
Session ID
Direction
Source Port(s)
Source Port(s)
Direction
Add
Cancel
Click the drop-down menu to select the session ID for which source ports are to be
added.
Displays the direction of traffic on the listed entry.
Displays the source port on the listed entry.
Select the configured port(s) with directions as mirrored port(s). Traffic of the
source port(s) is sent to the probe port.
Up to 16 source ports can be selected per session.
Click the drop-down menu to select the direction of traffic on source port(s) which
will be sent to the probe port. Possible values are:
 Tx and Rx - Both Ingress and Egress traffic.
 Rx - Ingress traffic only.
Tx - Egress traffic only.

Click Add to add the selected source ports to the list of configured source ports.
Click Cancel to discard the changes made on the page.
M
ANAGEMENT
Description
I
NTERFACE
141