Advantech EKI-9316P Series User Manual page 229

Industrial managed 16-port and 12-port full gigabit switch with poe/poe plus
Table of Contents

Advertisement

The following table describes the items in the previous menu.
Table 3-162. Security > DHCP Snooping > VLAN Configuration
Parameter
VLAN ID
DHCP Snooping
Mode
Submit
Interface Configuration
The DHCP Snooping Interface Configuration page allows users to configure DHCP snoop-ing
settings for each interface. To access this page, click Security > DHCP Snooping >
Interface Configuration.
Figure 3-166. Security > DHCP Snooping > Interface Configuration
The following table describes the items in the previous menu.
Table 3-163. Security > DHCP Snooping > Interface Configuration
Parameter
Interface
Trust State
Logging Invalid
Packets
Rate Limit
No Limit
Burst Interval
Select the VLAN for which information to be displayed or configured for DHCP
Snooping Application.
Click the drop-down menu to enable or disable the DHCP Snooping feature on
selected VLAN. The factory default is Disable.
Click Submit to update the switch with the values on the screen. If you want the
switch to retain the new values across a power cycle you must perform a save.
Click the drop-down menu to select the interface for which data is to be displayed
or configured.
Click the drop-down menu to enable or disable the DHCP snooping trust state. The
factory default is Disable.
Click the drop-down menu to enable or disable the DHCP snooping application to
log invalid packets on this interface. The factory default is Disable.
Enter the value to specify the DHCP Snooping purpose. If the incoming rate of
DHCP packets exceeds the value of this object for consecutively burst interval sec-
onds, the port will be shutdown. The range of Rate Limit is 0 to 300.
Click the box to specify no Rate Limit. If the rate limit is -1 burst interval has no
meaning, hence it is disabled.
Enter the value to specify the burst interval value for rate limiting purpose on this
interface. If the rate limit is None, then burst interval has no meaning. The range of
Burst Interval is 1 to 15.
M
ANAGEMENT
Description
Description
I
NTERFACE
217

Advertisement

Table of Contents
loading

This manual is also suitable for:

Eki-9312p series

Table of Contents