Qos; Access Control Lists - Advantech EKI-9316P Series User Manual

3.7. QoS

3.7.1 Access Control Lists

IP Access Control Lists
IP Access Control Lists are lists of IP access permissions.
Configuration
The Configuration page allows users to create or specify IP ACL rules. To access this
page, click QoS > Access Control Lists > IP Access Control Lists > Configuration.
Figure 3-182. QoS > Access Control Lists > IP Access Control Lists > Configuration
The following table describes the items in the previous menu.
Table 3-179. QoS > Access Control Lists > IP Access Control Lists > Configuration
Parameter
IP ACL
IP ACL ID
Submit
Table
Rename
Delete
Click the drop-down menu to select an existing entry or create an IP ACL entry. A
new IP Access Control List may be created or the configuration of an existing IP
ACL can be updated.
Enter a value for the IP ACL ID must be a whole number in the range of 1 to 99 for
IP Standard Access Lists and 100 to 199 for IP Extended Access Lists.
Click Submit to update the switch with the values on the screen. If you want the
switch to retain the new values across a power cycle you must perform a save.
Displays the current number/maximum number of IP ACLs.
Click Rename to rename an existing IP ACL. This button is shown when you want
to rename an existing IPv6 ACL.
Click Delete to remove the currently selected IP ACL from the switch configuration.
This button is shown when you want to delete an existing IPv6 ACL.
M
ANAGEMENT
Description
I
NTERFACE
231