The following table describes the items in the previous menu.
Table 3-3. Management > IP Configuration
Item
Interface Status
IPv4
Network Configura-
tion Protocol
IP Address
Subnet Mask
Default Gateway
Burned In MAC
Address
Management VLAN
ID
Submit
Renew DHCP IPv4
Address
3.3.4 AAA
Authentication Configuration
The Authentication Configuration allows users to configure authentication lists. To
access this page, click Management > AAA > Authentication Configuration.
Figure 3-6. Management > AAA > Authentication Configuration
Displays the link status.
Click the drop-down menu to specify a protocol after power-up. The default is
None.
Enter a value to specify the IP address of the interface. The default is
192.168.1.1
Enter a value to specify the IP subnet mask for the interface. The default is
255.255.255.0.
Enter a value to specify the default gateway for the IP interface. The default is
0.0.0.0
Displays the burned in MAC address of the switch.
Enter a value (between 1 to 4093) to specify a management VLAN ID of the switch.
The default is 1. And it's only available for administrator.
Click Submit to update the screen. To save the values across a power cycle per-
form a system save.
Click Renew DHCP IPv4 Address to renew a IPv4 address from DHCP server.
M
ANAGEMENT
Description
I
NTERFACE
41