Snmp Trap - Advantech EKI-7428G Series User Manual

M S
ANAGING WITCH
Table 4-85. Management > SNMP > SNMP User Settings (Continued)
Item
Password
Add
The ensuing table for User Status settings are informational only: User Name, Access
Right, Auth-Protocol, Priv-Protocol and Delete (click to delete the desired user name).

SNMP Trap

The SNMP Trap page allows you to set the IP address of the node and the SNMP
credentials corresponding to the version that is included in the trap message.
To access this page, click Management > SNMP > SNMP Trap.
The following table describes the items in the previous figure.
Table 4-86. Management > SNMP > SNMP Trap
Item
IP Address
Community Name
Version
Add
The ensuing table for Trap Host Status settings are informational only: No., IP Address,
Community Name, Version and Delete (click to delete the desired IP address).
115
Enter the characters to define the password associated with the
authorization protocol.
Click Add to save the values and update the screen.
Figure 4-88. Management > SNMP > SNMP Trap
Enter the IP address to designate the SNMP trap host.
Click the drop-down menu to select a defined community name.
Click the drop-down menu to designate the SNMP version credentials (v1
or v2c).
Click Add to save the values and update the screen.
Description
Description