Advantech EKI-9316P Series User Manual page 192

M I
ANAGEMENT NTERFACE
Multicast Router VLAN Configuration
The IGMP Snooping Multicast Router VLAN Configuration page allows users to configure
the VLAN ID and multicast router status for each interface. To access this page, click
Multi-cast > IGMP Snooping > Multicast Router VLAN Configuration.
Figure 3-129. Multicast > IGMP Snooping > Multicast Router VLAN Configuration
The following table describes the items in the previous menu.
Table 3-126. Multicast > IGMP Snooping > Multicast Router VLAN Configuration
Parameter
Interface
VLAN ID
Multicast Router
Submit
IGMP Snooping Table
The MFDB IGMP Snooping Table displays the type, description, and interface for each MAC
address. To access this page, click Multicast > IGMP Snooping > IGMP Snooping Table.
Figure 3-130. Multicast > IGMP Snooping > IGMP Snooping Table
180
Click the drop-down menu to select an interface. Select the interface for which you
want Multicast Router to be enabled.
Enter a VLAN ID for which the Multicast Router Mode is to be Enabled or Disabled.
Valid range is 1 to 4093.
Click the drop-down menu to enable or disable the multicast router function. The
value is enabled by default.
Click Submit to update the switch with the values on the screen. If you want the
switch to retain the new values across a power cycle you must perform a save.
Description