Figure 4.90 Management > Snmp > Snmp Trap - Advantech EKI-7710E-2C User Manual

The following table describes the items in the previous figure.
Item
User Name
Access Right
Encrypted
Auth-Protocol
Password
Priv-Protocol
Password
Add
The ensuing table for User Status settings are informational only: User Name,
Access Right, Auth-Protocol, Priv-Protocol and Delete (click to delete the desired
user name).
4.9.2.4 SNMP Trap
The SNMP Trap page allows you to set the IP address of the node and the SNMP
credentials corresponding to the version that is included in the trap message.
To access this page, click Management > SNMP > SNMP Trap.
The following table describes the items in the previous figure.
Item
IP Address
Community Name
Version
Add
The ensuing table for Trap Host Status settings are informational only: No., IP
Address, Community Name, Version and Delete (click to delete the desired IP
address).
EKI-7710 Series User Manual
Description
Enter a user name (up to 32 characters) to create an SNMP profile.
Click read-only or read-write to define the access right for the profile.
Click the option to set the encrypted option for the user setting.
Click the drop-down menu to select the authentication level: MD5 or
SHA. The field requires a user password.
MD5: specify HMAC-MD5-96 authentication level

SHA: specify HMAC-SHA authentication protocol

Enter the characters to define the password associated with the
authentication protocol.
Click the drop-down menu to select an authorization protocol: none or
DES.The field requires a user password.
None: no authorization protocol in use

DES: specify 56-bit encryption in use

Enter the characters to define the password associated with the
authorization protocol.
Click Add to save the values and update the screen.
Figure 4.90 Management > SNMP > SNMP Trap
Description
Enter the IP address to designate the SNMP trap host.
Click the drop-down menu to select a defined community name.
Click the drop-down menu to designate the SNMP version credentials
(v1 or v2c).
Click Add to save the values and update the screen.
95