Ipv6 Access Control Lists - Advantech EKI-9316P Series User Manual

M I
ANAGEMENT NTERFACE

IPv6 Access Control Lists

Configuration
The Configuration page allows users to configure settings for existing IPv6 ACLs or create
new ones. To access this page, click QoS > Access Control Lists > IPv6 Access
Control Lists > Configuration.
Figure 3-185. QoS > Access Control Lists > IPv6 Access Control Lists > Configuration
The following table describes the items in the previous menu.
Table 3-182. QoS > Access Control Lists > IPv6 Access Control Lists > Configuration
Parameter
IPv6 ACL
IPv6 ACL Name
Table
Submit
Rename
Delete
236
Click the drop-down menu to select a new IPv6 ACL entry or the configure an exist-
ing IPv6 ACL can be updated by selecting right option from the pull-down menu.
Enter the IPv6 ACL Name string which includes alphanumeric characters only. The
name must start with an alphabetic character. This field displays the name of the
currently selected IPv6 ACL if the ACL has already been created. The name can
have 1 to 31 alphanumeric characters.
Displays the current number/maximum number of ACLs.
Click Submit to update the switch with the values on the screen. If you want the
switch to retain the new values across a power cycle you must perform a save.
This button is shown when you create a new IPv6 ACL.
Click Rename to rename the currently selected IPv6 ACL and shows up only when
an existing IPv6 ACL is selected.
Click Delete to remove the currently selected IPv6 ACL and shows up only when
an existing IPv6 ACL is selected.
Description