Dhcp L2 Relay - Advantech EKI-9316P Series User Manual

The following table describes the items in the previous menu.
Table 3-166. Security > DHCP Snooping > Statistics
Parameter
Interface
MAC Verify Failures
Client Ifc Mismatch
DHCP Server Msgs
Received
Clear Statistics

DHCP L2 Relay

Global Configuration
The DHCP L2 Relay Global Configuration page allows users to enable or disable DHCP L2
Relay Mode. To access this page, click Security > DHCP Snooping > DHCP L2 Relay >
Global Configuration.
Figure 3-170. Security > DHCP Snooping > DHCP L2 Relay > Global
Configuration The following table describes the items in the previous menu.
Table 3-167. Security > DHCP Snooping > DHCP L2 Relay > Global Configuration
Parameter
DHCP L2 Relay
Mode
Submit
Displays the untrusted and snooping enabled interface for which statistics to be
displayed.
Displays number of packets that were dropped by DHCP Snooping as there is no
matching DHCP Snooping binding entry found.
Displays the number of DHCP messages that are dropped based on source MAC
address and client HW address verification.
Displays the number of Server messages that are dropped on an untrusted port.
Click Clear Statistics to reset all interfaces statistics.
Click the drop-down menu to enable or disable the DHCP L2 Relay feature. The
factory default is Disable.
Click Submit to update the switch with the values on the screen. If you want the
switch to retain the new values across a power cycle you must perform a save.
M
ANAGEMENT
Description
Description
I
NTERFACE
221