Service Configuration - Advantech EKI-9316P Series User Manual

Table 3-197. QoS > Differentiated Services > Policy Attribute Summary (Continued)
Parameter
Attribute Details
Refresh

Service Configuration

The Service Configuration page allows users to select an interface and assign an In/Out
pol-icy for each. To access this page, click QoS > Differentiated Services > Service
Configuration.
Figure 3-201. QoS > Differentiated Services > Service Configuration
The following table describes the items in the previous menu.
Table 3-198. QoS > Differentiated Services > Service Configuration
Parameter
Interface
Direction
Policy In
Policy Out
Table Interface
Table Direction
Table Operational
Status
Table Policy Name
Submit
Displays the configured values of the attached attributes.
Click Refresh to update the screen.
Click the drop-down menu to select an interface.
Click the drop-down menu to select the traffic direction of the interface. It is only
available when Interface is All.
Click the drop-down menu to select a policy name and the policy type is In.
Click the drop-down menu to select a policy name and the policy type is Out.
Displays the interface that uniquely specifies an interface. It is only available when
Interface is All.
Displays the traffic direction for this service interface. It is only available when Inter-
face is All.
Displays the operational status of this service interface. It is only available when
Interface is All.
Displays the name of the attached policy. It is only available when Interface is All.
Click Submit to update the screen. To save the values across a power cycle per-
form a system save.
M
ANAGEMENT
Description
Description
I
NTERFACE
253