Table of Contents
Advertisement
The following table describes the items in the previous menu.
Table 3-202. QoS > Class of Service > Class of Service > 802.1p Priority Mapping
Parameter
Interface
802.1p Priority
Traffic Class
Submit
Trust Mode Configuration
The Trust Mode Configuration allows users to assign a trust mode for each interface.
To access this page, click QoS > Class of Service > Trust Mode Configuration.
Figure 3-206. QoS > Class of Service > Trust Mode Configuration
Click the drop-down menu to select the physical interface for which you want to dis-
play or configure data. Select 'All' to set the parameters for all ports to the same
values.
Displays the 802.1p priority to be mapped.
Click the drop-down menu to select the internal traffic class to map the correspond-
ing 802.1p priority.
Click Submit to update the switch with the values on the screen. If you want the
switch to retain the new values across a power cycle you must perform a save.
M
ANAGEMENT
Description
I
NTERFACE
257
Advertisement
Table of Contents
