Advantech EKI-9316P Series User Manual page 121

Industrial managed 16-port and 12-port full gigabit switch with poe/poe plus
Table of Contents

Advertisement

Table 3-65. Management > RADIUS > Accounting Server Configuration (Continued)
Parameter
Port
Secret
Secret Configured
RADIUS Accounting
Server Name
Submit
Remove
Refresh
Named Accounting Server Status
The Named Accounting Server Status page displays information about the accounting
serv-ers configured on the system. To access this page, click Management > RADIUS >
Named Accounting Server Status.
Figure 3-68. Management > RADIUS > Named Accounting Server Status
Displays the authentication port the server uses to verify the RADIUS accounting
server authentication. The port is a UDP port, and the valid range is 1-65535. The
default port for RADIUS accounting is 1813.
Enter the pass phrase to use with the specified accounting server. This field is only
displayed if you are logged into the switch with READWRITE access. The name
contain up to 16 characters.
Apply: The Secret will only be applied if this box is checked. If the box is not

checked, anything entered in the Secret field will have no affect and will not be
retained. This field is only displayed if the user has READWRITE access.
Displays the configuration status of the shared pass phrase. By default the secret
key will not be set for the server.
Enter the name of the RADIUS accounting server. The name can contain up to 32
alphanumeric characters. Spaces, hyphens, and underscores are also permitted. If
you do not assign a name, the server is assigned the default name Default-
RADIUS-Server.You cannot use the same name for multiple RADIUS accounting
servers.
Click Submit to update the switch with the values on the screen. If you want the
switch to retain the new values across a power cycle you must perform a save.
Click Remove to delete a configured RADIUS authentication server, select the IP
address of the server from the RADIUS Server Host Address menu, and then click
Remove.
Click Refetch to update the database and display it again starting with the first
entry in the table.
M
ANAGEMENT
Description
I
NTERFACE
109

Advertisement

Table of Contents
loading

This manual is also suitable for:

Eki-9312p series

Table of Contents