Advantech EKI-9316P Series User Manual page 199

VLAN Status
The MLD Snooping VLAN Status page displays the summary of the MLD snooping configu-
ration for VLAN. To access this page, click Multicast > MLD Snooping > VLAN Status.
The following table describes the items in the previous menu.
Table 3-134. Multicast > MLD Snooping > VLAN Status
Parameter
VLAN ID
Admin Mode
Fast Leave Admin
Mode
Group Membership
Interval (secs)
Maximum Response
Time (secs)
Multicast Router
Expiry Time (secs)
Refresh
VLAN Configuration
The MLD Snooping VLAN Configuration page allows users to configure MLD snooping
VLAN settings. To access this page, click Multicast > MLD Snooping > VLAN
Configuration.
Figure 3-138. Multicast > MLD Snooping > VLAN Configuration
Figure 3-137. Multicast > MLD Snooping > VLAN Status
Displays all VLAN IDs for which the MLD Snooping mode is Enabled.
Displays MLD Snooping Mode for VLAN ID.
Displays fast Leave Mode for VLAN ID.
Displays Group Membership Interval of MLD Snooping for the specified VLAN ID.
Valid range is 2 to 3600.
Displays Maximum Response Time of MLD Snooping for the specified VLAN ID.
Valid range is 1 to 3599.Its value should be greater than group membership interval
value.
Displays Multicast Router Expiry Time of MLD Snooping for the specified VLAN ID.
Valid range is 0 to 3600.
Click Refresh to update the data on the screen with the present state of the data in
the switch.
M
ANAGEMENT
Description
I
NTERFACE
187