The following table describes the items in the previous menu.
Table 3-211. Maintenance > Factory Defaults
Parameter
Reset
3.8.4 Download
The Download page allows users to download a file to the switch. To access this page, click
Maintenance > Download.
The following table describes the items in the previous menu.
Table 3-212. Maintenance > Download
Parameter
File Type
Transfer Mode
Server Address Type Enter the IPv4 address to indicate the format of the TFTP/SFTP/SCP Server
Click Reset to have all configuration parameters reset to their factory default val-
ues. All changes that have been made will be lost, even if you have issued a save.
You will be shown a confirmation screen after you select the button.
Figure 3-215. Maintenance > Download
Click the drop-down menu to select the type of file you want to download:
Startup Configuration - Text based startup configuration file.
Script - Text based configuration script file.
Firmware - Specify image file when you want to upgrade the operational flash.
NOTE: To download SSH key files, SSH must be administratively disabled and
there can be no active SSH sessions.
Click the drop-down menu to select the protocol to use to transfer the file.
TFTP - Trivial File Transfer Protocol
SFTP - Secure File Transfer Program
SCP - Secure Copy
USB - Universal Serial Bus
Address field.
M
ANAGEMENT
Description
Description
I
NTERFACE
265