Advantech EKI-9316P Series User Manual page 237

Industrial managed 16-port and 12-port full gigabit switch with poe/poe plus
Table of Contents

Advertisement

VLAN Configuration
The Dynamic ARP Inspection VLAN Configuration page allows uses to configure the
dynamic ARP inspection VLAN. To access this page, click Security > DHCP Snooping >
Dynamic ARP Inspection > VLAN Configuration.
Figure 3-175. Security > DHCP Snooping > Dynamic ARP Inspection > VLAN Configuration
The following table describes the items in the previous menu.
Table 3-172. Security > DHCP Snooping > Dynamic ARP Inspection > VLAN Configuration
Parameter
VLAN ID
Dynamic ARP
Inspection
Logging Invalid
Packets
ARP ACL Name
Static Flag
Submit
Refresh
Click the drop-down menu to select the DAI Capable VLANs for which information
has to be displayed or configured.
Click the drop-down menu to enable or disable the Dynamic ARP Inspection. If this
object is set to 'Enable' Dynamic ARP Inspection is enabled. If this object is set to
'Disable', Dynamic ARP Inspection is disabled. The factory default is Disable.
Click the drop-down menu to set the Dynamic ARP Inspection logging policy. If this
object is set to 'Enable' it will log the Invalid ARP Packets information. If this object
is set to 'Disable', Dynamic ARP Inspection logging is disabled. The factory default
is Enable.
Enter the name of ARP Access list. A VLAN can be configured to use this ARP
ACL containing rules as the filter for ARP packet validation. The name can contain
up to 31 alphanumeric characters.
Click the drop-down menu to select the ARP packet validation using the DHCP
snooping database in case ARP ACL rules don't match. If the flag is enabled then
the ARP Packet will be validated by the ARP ACL Rules only. If the flag is disabled
then the ARP Packet needs further validation by using the DHCP Snooping entries.
The factory default is Disable.
Click Submit to update the switch with the values on the screen. If you want the
switch to retain the new values across a power cycle you must perform a save.
Click Refresh to update the data on the screen with the present state of the data in
the switch.
M
ANAGEMENT
Description
I
NTERFACE
225

Advertisement

Table of Contents
loading

This manual is also suitable for:

Eki-9312p series

Table of Contents