Advantech EKI-9316P Series User Manual page 201

The following table describes the items in the previous menu.
Table 3-136. Multicast > MLD Snooping > Multicast Router Status
Parameter
Interface
Multicast Router
Refresh
Multicast Router Configuration
The MLD Snooping Multicast Router Configuration page allows users to enable or disable
the multicast router for each interface. To access this page, click Multicast > MLD
Snoop-ing > Multicast Router Configuration.
Figure 3-140. Multicast > MLD Snooping > Multicast Router
Configuration The following table describes the items in the previous menu.
Table 3-137. Multicast > MLD Snooping > Multicast Router Configuration
Parameter
Interface
Multicast Router
Submit
Click the drop-down menu to select the single select box lists all physical and LAG
interfaces. Select the interface for which you want to display the status.
Displays the multicast router status (enable or disable).
Click Refresh to update the data on the screen with the present state of the data in
the switch.
Click the drop-down menu to select an interface. Select the interface for which you
want Multicast Router to be enabled.
Click the drop-down menu to enable or disable Multicast Router on the selected
interface.
Click Submit to update the switch with the values on the screen. If you want the
switch to retain the new values across a power cycle you must perform a save.
M
ANAGEMENT
Description
Description
I
NTERFACE
189