Advantech EKI-9316P Series User Manual page 133

Table 3-80. Switching > MAC Address Table > Forward Database (Continued)
Parameter
MAC Address
Search
Search
MAC Address
Source Slot/Port(s)
Interface Index
Status
Refresh
Enter the MAC address and click Search to initiate a search. Enter the two byte
hexadecimal VLAN ID followed by the six byte hexadecimal MAC address in two-
digit groups separated by colons, for example 01:23:45:67:89:AB:CD:EF where
01:23 is the VLAN ID and 45:67:89:AB:CD:EF is the MAC address. Then click on
the search button. If the address exists, that entry is displayed as the first entry fol-
lowed by the remaining (greater) MAC addresses. An exact match is required.
Click Search to initiate a specified MAC address search.
Displays a unicast MAC address for which the switch has forwarding and/or filter-
ing information. The format is a two byte hexadecimal VLAN ID number followed by
a six byte MAC address with each byte separated by colons. For example:
01:23:45:67:89:AB:CD:EF, where 01:23 is the VLAN ID and 45:67:89:AB:CD:EF is
the MAC address.
Displays a port where this address was learned -- i.e. the port through which the
MAC address can be reached.
Displays an Interface Index of the MIB interface table entry associated with the
source port.
Displays the status of this entry. The possible values are:
 Static: the entry was added when a static MAC filter was defined.
Learned: the entry was learned by observing the source MAC addresses of

incoming traffic, and is currently in use.
Management: the system MAC address, which is identified with interface 0.1.

Self: the MAC address of one of the switch's physical interfaces.

Click Refresh to update the data on the screen with the present state of the data in
the switch.
M
ANAGEMENT
Description
I
NTERFACE
121