Advantech EKI-9316P Series User Manual page 136

M I
ANAGEMENT NTERFACE
Table 3-81. Switching > Interface Setting > Configuration (Continued)
Parameter
Link Status
Link Trap
Maximum Frame
Size
Interface Index
Submit
Status
The Port Summary page displays the summary of the port configuration. To access
this page, click Switching > Interface Setting > Status.
124
Displays the link status (up or down).
Click the drop-down menu to enable or disable the Link Trap function. This object
determines whether or not to send a trap when link status changes. The factory
default is Enable.
Enter a value to specify the maximum ethernet frame size the interface supports or
is configured, including ethernet header, CRC, and payload. 1518 to 12288. The
default maximum frame size is 1518.
Displays the interface index of the interface table entry associated with this port.
Click Submit to update the switch with the values on the screen. If you want the
switch to retain the new values across a power cycle you must perform a save.
Figure 3-84. Switching > Interface Setting > Status
Description