Advantech EKI-9316P Series User Manual page 83

Static Port Binding Configuration
The DHCP Static Port Binding Configuration page allows users to configure the IP address
and IP mask for each interface. To access this page, click Management > DHCP Server >
Static Port Binding Configuration.
Figure 3-31. Management > DHCP Server > Static Port Binding Configuration
The following table describes the items in the previous menu.
Table 3-29. Management > DHCP Server > Static Port Binding Configuration
Parameter
Interface
IP Address
IP Mask
Delete
Create
Interface
IP Address
IP Mask
Refresh
Click the drop-down menu to select a port for configuration
Enter the IP address to assign the selected port.
Enter the IP mask address to assign the selected port.
Click Delete to clear the current configuration settings.
Click Create to accept the configuration settings and include a new entry into the
DHCP Static Port Binding table.
Displays the port number/type.
Displays the assigned IP address for the corresponding port.
Displays the assigned IP address for the corresponding port.
Click Refresh to update the screen.
M
ANAGEMENT
Description
I
NTERFACE
71