Email Alert To Address Configuration - Advantech EKI-9316P Series User Manual

The following table describes the items in the previous menu.
Table 3-19. Management > Email Alerts > Email Alert Subject Configuration
Parameter
Message Type
Email Subject
Remove
Submit
Delete
Refresh

Email Alert To Address Configuration

Users can configure the email address to where emails will be sent based on the
message type. To access this page, click Management > Email Alerts > Email Alert To
Address Configuration.
Figure 3-22. Management > Email Alerts > Email Alert To Address
Configuration The following table describes the items in the previous menu.
Table 3-20. Management > Email Alerts > Email Alert To Address Configuration
Parameter
Message Type
To Address
Remove
Submit
Delete
Refresh
Click the drop-down menu to configure the logging email alert message type.
Enter the subject (up to 255 alphanumeric characters) to configure the logging
email alert subject.
Check the checkboxes to select the email alerts need to be delete.
Click Submit to update the screen. To save the values across a power cycle per-
form a system save.
Click Delete to delete the selected row.
Click Refresh to update the screen.
Click the drop-down menu to select the message type.
Enter the address (up to 255 characters) to send the logging email alert. Support
up to 5 addresses per message type.
Check the checkboxes to select the addresses need to be delete.
Click Submit to update the screen. To save the values across a power cycle per-
form a system save.
Click Delete to delete the selected row.
Click Refresh to update the screen.
M
ANAGEMENT
Description
Description
I
NTERFACE
61