Interface Queue Configuration - Advantech EKI-9316P Series User Manual

M I
ANAGEMENT NTERFACE
Interface Configuration
The Interface Configuration allows users to assign interface shaping rate for each interface.
To access this page, click QoS > Class of Service > Interface Configuration.
Figure 3-208. QoS > Class of Service > Interface Configuration
The following table describes the items in the previous menu.
Table 3-205. QoS > Class of Service > Interface Configuration
Parameter
Interface
Interface Shaping
Rate
Restore Defaults
Submit

Interface Queue Configuration

The Interface Queue Configuration allows users to configure queue settings for each inter-face.
To access this page, click QoS > Class of Service > Interface Queue Configuration.
Figure 3-209. QoS > Class of Service > Interface Queue Configuration
260
Click the drop-down menu to select the CoS configurable interfaces. The option
"Global" represents the most recent global configuration settings. These may be
overridden on a per-interface basis.
Enter a value to set the maximum bandwidth allowed, typically used to shape the
outbound transmission rate. This value is controlled independently of any per-
queue maximum bandwidth configuration. It is effectively a second-level shaping
mechanism. Default value is 0. Valid Range is 0 to 100 in increments of 1. The
value 0 means maximum is unlimited.
Click Restore Defaults to restores default settings.
Click Submit to update the switch with the values on the screen. If you want the
switch to retain the new values across a power cycle you must perform a save.
Description