Protocol CoS Queue Forwarding
The Protocol CoS Queue Forwarding page allows users to force protocol BPDU
forwarding on specific CoS Queue. To access this page, click QoS > Class of Service >
Protocol CoS Queue Forwarding.
Figure 3-211. QoS > Class of Service > Protocol CoS Queue Forwarding
The following table describes the items in the previous menu.
Table 3-208. QoS > Class of Service > Protocol CoS Queue Forwarding
Parameter
Admin Mode
Traffic Class
Submit
3.8. Maintenance
3.8.1 System Resources
The System Resources page displays memory usage and total CPU Utilization. To
access this page, click Maintenance > System Resources.
Click the drop-down menu to select the force forwarding administration state. You
must select enable if you want force forwarding protocol BPDU to specific Traffic
Class. The factory default is Disable.
Enter a value to set the force forwarding protocol BPDU. Valid Range: 0 to 7.
Click Submit to update the configuration to the switch. Configuration changes take
effect immediately. These changes will not be retained across a power cycle unless
a save is performed.
Figure 3-212. Maintenance > System Resources
M
ANAGEMENT
Description
I
NTERFACE
263