Lldp - Advantech EKI-9316P Series User Manual

M I
ANAGEMENT NTERFACE
Table 3-45. Management > ISDP > Statistics (Continued)
Parameter
Clear
Refresh

3.3.15 LLDP

Global Configuration
This section describes how to configure the Link Layer Discovery Protocol (LLDP). The
LLDP is a one-way, device discovery protocol that transmits attributes between devices
for the purpose of discovering the devices on the network.
To access this page, click Management > LLDP > Global Configuration.
Figure 3-48. Management > LLDP > Global Configuration
The following table describes the items in the previous menu.
Table 3-46. Management > LLDP > Global Configuration
Parameter
Transmit Interval
Transmit Hold Multi-
plier
Re-Initialization
Delay
Notification Interval
Submit
Interface Configuration
This section describes the configuration function for the LLDP interface. The following
inter-face allows you to define the ports authorized to service LLDP.
88
Click Clear to refresh the ISDP Statistics of all the interfaces.
Click Refresh to update the data on the screen with the present state of the data in
the switch.
Enter the interval in seconds to transmit LLDP frames. The range is from 5 to
32768 secs. Default value is 30 seconds.
Enter the multiplier on Transmit Interval to assign TTL. The range is from 2 to 10
secs Default value is 4.
Enter the delay before re-initialization. The range is from 1 to 10 secs. Default
value is 2 seconds.
Enter the interval in seconds for transmission of notifications. The range is from 5
to 3600 secs. Default value is 5 seconds.
Click Submit to update the switch with the values on the screen. If you want the
switch to retain the new values across a power cycle you must perform a save.
Description
Description