Radius - Advantech EKI-9316P Series User Manual

3.3.17 RADIUS

Configuration
The configuration page allows users to view and configure various settings for the RADIUS
servers configured on the system. To access this page, click Management > RADIUS >
Configuration.
The following table describes the items in the previous menu.
Table 3-61. Management > RADIUS > Configuration
Parameter
Number of Config-
ured Authentication
Servers
Number of Config-
ured Accounting
Servers
Number of Named
Authentication
Server Groups
Number of Named
Accounting Server
Groups
Max Number of
Retransmits
Figure 3-63. Management > RADIUS > Configuration
Displays the number of configured Authentication RADIUS servers. The value can
range from 0 to 32.
Displays the number of RADIUS Accounting Servers configured. The value can
range from 0 to 32.
Displays the number of Named RADIUS server Authentication groups configured.
Displays the number of Named RADIUS server Accounting groups configured.
Enter the value for the maximum number of times a request packet is retransmit-
ted. The valid range is 1-15. Consideration to maximum delay time should be given
when configuring RADIUS max retransmit and RADIUS timeout. If multiple
RADIUS servers are configured, the max retransmit value on each will be
exhausted before the next server is attempted. A retransmit will not occur until the
configured timeout value on that server has passed without a response from the
RADIUS server. Therefore, the maximum delay in receiving a response from the
RADIUS application equals the sum of (retransmit times timeout) for all configured
servers. If the RADIUS request was generated by a user login attempt, all user
interfaces will be blocked until the RADIUS application returns a response.
M
ANAGEMENT
Description
I
NTERFACE
103