Supplicant Port Configuration - Advantech EKI-9316P Series User Manual

Table 3-151. Security > Port Access Control > PAE Capability Configuration (Continued)
Parameter
Submit
Refresh

Supplicant Port Configuration

The Port Access Control Supplicant Port Configuration page allows users to configure the
port access control settings for supplicant ports. To access this page, click Security >
Port Access Control > Supplicant Port Configuration.
Figure 3-155. Security > Port Access Control > Supplicant Port Configuration
The following table describes the items in the previous menu.
Table 3-152. Security > Port Access Control > Supplicant Port Configuration
Parameter
Interface
Control Mode
User Name
Click Submit to update the switch with the values on the screen. If you want the
switch to retain the new values across a power cycle you must perform a save.
Click Refresh to update the data on the screen with the present state of the data in
the switch.
Click the drop-down menu to select the port to be configured. When the selection is
changed, a screen refresh will occur causing all fields to be updated for the newly
selected port. All physical interfaces are valid.
Click the drop-down menu to select an option for control mode. The options are:
Force-unauthorized: The Supplicant port access entity (PAE) unconditionally

sets the controlled port to unauthorized.
Auto: The Supplicant PAE sets the controlled port mode to reflect the outcome

of the authentication exchanges between the supplicant, authenticator, and the
authentication server.
Force-authorized: The Supplicant PAE unconditionally sets the controlled port

to authorized.
Enter the users that will have access to the specified port. The possible values are
admin and guest.
M
ANAGEMENT
Description
Description
I
NTERFACE
203