Advantech EKI-9316P Series User Manual page 161

Table 3-95. Switching > VLAN Setting > Protocol-based VLAN > Configuration (Continued)
Parameter
Submit
Delete
Status
The Protocol-based VLAN Summary displays the list of all groups. To access this page, click
Switching > VLAN Setting > Protocol-based VLAN > Status.
Figure 3-99. Switching > VLAN Setting > Protocol-based VLAN >
Status The following table describes the items in the previous menu.
Table 3-96. Switching > VLAN Setting > Protocol-based VLAN > Status
Parameter
Group Name
Group ID
Protocol(s)
VLAN
Interface(s)
Refresh
Click Submit to update the switch with the values on the screen. If you want the
switch to retain the new values across a power cycle you must perform a save.
Click Delete to remove the Protocol Based VLAN group identified by the value in
the Group ID field. If you want the switch to retain the deletion across a power
cycle, you must perform a save.
Displays the name associated with the group. Group names can be up to 16 char-
acters long. The maximum number of groups allowed is 128.
Displays the number used to identify the group.
Displays the protocol(s) that belongs to the group.
Displays the VLAN ID associated with the group.
Displays the interfaces associated with the group.
Click Refresh to update the data on the screen with the present state of the data in
the switch.
M
ANAGEMENT
Description
Description
I
NTERFACE
149