Binding Configuration - Advantech EKI-9316P Series User Manual

M I
ANAGEMENT NTERFACE
Table 3-163. Security > DHCP Snooping > Interface Configuration
Parameter
Submit
Refresh

Binding Configuration

The DHCP Snooping Binding Configuration page allows users to configure MAC and IP
addresses and VLAN IDs for each interface. To access this page, click Security >
DHCP Snooping > Binding Configuration.
Figure 3-167. Security > DHCP Snooping > Binding Configuration
The following table describes the items in the previous menu.
Table 3-164. Security > DHCP Snooping > Binding Configuration
Parameter
Interface
MAC Address
VLAN ID
IP Address
Add
218
Click Submit to update the switch with the values on the screen. If you want the
switch to retain the new values across a power cycle you must perform a save.
Click Refresh to update the data on the screen with the present state of the data in
the switch.
Click the drop-down menu to select the interface to add a binding into the DHCP
snooping database.
Enter a MAC address for the binding to be added. This is the key value to the bind-
ing database.
Click the drop-down menu to select the VLAN from the list for the binding rule. The
range of the VLAN ID is 1 to 4093.
Enter a valid IP Address for the binding rule.
Click Add to create a DHCP snooping binding entry into the database.
Description
Description