Ip Dscp Mapping Configuration - Advantech EKI-9316P Series User Manual

IP DSCP Mapping Configuration

The IP DSCP Mapping Configuration allows users to assign IP DSCP value and traffic
class for each interface. To access this page, click QoS > Class of Service > IP DSCP
Mapping Configuration.
Figure 3-207. QoS > Class of Service > IP DSCP Mapping Configuration
The following table describes the items in the previous menu.
Table 3-204. QoS > Class of Service > IP DSCP Mapping Configuration
Parameter
Slot/Port
Traffic Class
Submit
Restore Defaults
Click the drop-down menu to select the CoS configurable interfaces. The option
"Global" represents the most recent global configuration settings. These may be
overridden on a per-interface basis.
Displays the internal traffic class to map the corresponding IP DSCP value. Valid
Range is 0 to 7.
Click Submit to update the switch with the values on the screen. If you want the
switch to retain the new values across a power cycle you must perform a save.
Click Restore Defaults to restores default settings.
M
ANAGEMENT
Description
I
NTERFACE
259