Advantech EKI-9316P Series User Manual page 93

Industrial managed 16-port and 12-port full gigabit switch with poe/poe plus
Table of Contents

Advertisement

Table 3-39. Management > Date and Time > Status (Continued)
Parameter
Last Update Time
Last Attempt Time
Last Attempt Status
Server IP Address
Address Type
Server Stratum
Reference Clock Id
Server Mode
Unicast Server Max
Entries
Unicast Server Cur-
rent Entries
Broadcast Count
Date and Time Status
Time Zone
Time Zone Acronym
Time Zone Offset
System Date
Displays the local date and time (UTC) the SNTP client last updated the system
clock.
Displays the local date and time (UTC) of the last SNTP request or receipt of an
unsolicited message.
Displays the status of the last SNTP request or unsolicited message for both uni-
cast and broadcast modes. If no message has been received from a server, a sta-
tus of other is displayed. These values are appropriate for all operational modes.
Other - None of the following enumeration values.

Success - The SNTP operation was successful and the system time was

updated.
Request Timed Out - A directed SNTP request timed out without receiving a

response from the SNTP server.
Bad Date Encoded - The time provided by the SNTP server is not valid.

Version Not Supported - The SNTP version supported by the server is not com-

patible with the version supported by the client.

Server Unsynchronized - The SNTP server is not synchronized with its peers.
This is indicated via the 'leap indicator' field on the SNTP message.
Server Kiss Of Death - The SNTP server indicated that no further queries were

to be sent to this server. This is indicated by a stratum field equal to 0 in a
message received from a server.
Displays the IP address of the server for the last received valid packet. If no mes-
sage has been received from any server, an empty string is shown.
Displays the address type of the SNTP Server address for the last received valid
packet.
Displays the claimed stratum of the server for the last received valid packet.
Displays the reference clock identifier of the server for the last received valid
packet.
Displays the server mode for the last received valid packet.
Displays the maximum number of unicast server entries that can be configured on
this client.
Displays the number of current valid unicast server entries configured for this cli-
ent.
Displays the number of unsolicited broadcast SNTP messages received and pro-
cessed by the SNTP client since last reboot.
Displays the full name of the system time zone.
Displays the acronym of the system time zone.
Displays the UTC offset of the system time zone.
Displays the local date of the system.
M
ANAGEMENT
Description
I
NTERFACE
81

Advertisement

Table of Contents
loading

This manual is also suitable for:

Eki-9312p series

Table of Contents