H
I
ARDWARE
NSTALLATION
Installing the DIN-Rail Mounting Kit
Insert the top back of the mounting bracket over the DIN rail.
Push the bottom of the switch towards the DIN rail until it snaps into place.
\
Removing the DIN-Rail Mounting Kit
1. Push the switch down to free the bottom of the plate from the DIN rail.
2. Rotate the bottom of the device towards you and away from the DIN rail.
3. Once the bottom is clear of the DIN rail, lift the device straight up to unhook it from the
DIN rail.
\
16
Figure 1-8. Installing the DIN-Rail Mounting Kit
Figure 1-9. Removing the DIN-Rail
1
DIN Rail
2
2
DIN Rail
1