Port Access Control - Advantech EKI-9316P Series User Manual

3.6.2 Port Access Control

Configuration
The Port Access Control Configuration page allows users to enable or disable port access
settings. To access this page, click Security > Port Access Control > Configuration.
Figure 3-152. Security > Port Access Control > Configuration
The following table describes the items in the previous menu.
Table 3-149. Security > Port Access Control > Configuration
Parameter
Administrative Mode
VLAN Assignment
Mode
Dynamic VLAN Cre-
ation Mode
Monitor Mode
Submit
Cancel
Click the drop-down menu to enable or disable the administration mode. By default
Administrative Mode is Disabled.
Click the drop-down menu to enable or disable the VLAN Assignment mode. The
default value is Disable.
Click the drop-down menu to enable or disable the Dynamic VLAN Creation Mode.
The default value is Disable.
Click the drop-down menu to enable or disable the Monitor Mode. The default
value is Disable. The feature monitors the dot1x authentication process and helps
in diagnosis the authentication failure cases.
Click Submit to update the switch with the values on the screen. If you want the
switch to retain the new values across a power cycle you must perform a save.
Click Cancel to discard the changes made on the page.
M
ANAGEMENT
Description
I
NTERFACE
199