Advantech EKI-9316P Series User Manual page 168

M I
ANAGEMENT NTERFACE
Table 3-105. Switching > GARP > Status (Continued)
Parameter
Port GMRP Mode
Join Timer (centi-
secs)
Leave Timer (centi-
secs)
Leave All Timer (cen- Displays the Leave All Time controls how frequently LeaveAll PDUs are generated.
tisecs)
Refresh
Global Configuration
The GARP Switch Configuration page allows users to enable or disable the GVRP and
GMRP modes. To access this page, click Switching > GARP > Global Configuration.
156
Displays the GMRP administrative mode for the port is enabled or disabled. The
factory default is Disable.
Displays the time between the transmission of GARP PDUs registering (or re-regis-
tering) membership for a VLAN or multicast group in centiseconds. An instance of
this timer exists for each GARP participant for each port. Permissible values are 10
to 100 centiseconds (0.1 to 1.0 seconds). The factory default is 20 centiseconds
(0.2 seconds).
Displays the time to wait after receiving an unregister request for a VLAN or multi-
cast group before deleting the associated entry, in centiseconds. This allows time
for another station to assert registration for the same attribute in order to maintain
uninterrupted service. An instance of this timer exists for each GARP participant for
each port. Permissible values are 20 to 600 centiseconds (0.2 to 6.0 seconds). The
factory default is 60 centiseconds (0.6 seconds).
A LeaveAll PDU indicates that all registrations will shortly be deregistered. Partici-
pants will need to rejoin in order to maintain registration. An instance of this timer
exists for each GARP participant for each port. The Leave All Period Timer is set to
a random value in the range of LeaveAllTime to 1.5*LeaveAllTime. Permissible val-
ues are 200 to 6000 centiseconds (2 to 60 seconds). The factory default is 1000
centiseconds (10 seconds).
Click Refresh to update the data on the screen with the present state of the data in
the switch.
Figure 3-109. Switching > GARP > Global Configuration
Description