Advantech EKI-9316P Series User Manual page 166

M I
ANAGEMENT NTERFACE
The following table describes the items in the previous menu.
Table 3-103. Switching > QinQ > Interface Configuration
Parameter
Interface
Interface Mode
Submit
Remove
Interface Status
The DVLAN Interface Summary page displays the assigned mode and Ethertype for each
interface. To access this page, click Switching > QinQ > Interface Summary.
The following table describes the items in the previous menu.
Table 3-104. Switching > QinQ > Interface Summary
Parameter
Interface
Interface Mode
154
Click the drop-down menu to select the physical interface for which you want to dis-
play or configure data. Select 'All' to set the parameters for all ports to same values.
Click the drop-down menu to specify the administrative mode via which Double
VLAN Tagging can be enabled or disabled. The default value for this is Disable.
Click Submit to update the switch with the values on the screen. If you want the
switch to retain the new values across a power cycle you must perform a save.
Click Remove to delete the selected Ether Type.
Figure 3-107. Switching > QinQ > Interface Summary
Displays the physical interface for which data is being displayed.
Displays the administrative mode via which Double VLAN Tagging can be enabled
or disabled.
Description
Description