Advantech EKI-9316P Series User Manual page 114

M I
ANAGEMENT NTERFACE
Server Configuration
The Server Configuration page allows users to configure settings for TACACS+ servers.
To access this page, click Management > TACACS+ > Server Configuration.
Figure 3-62. Management > TACACS+ > Server Configuration
The following table describes the items in the previous menu.
Table 3-60. Management > TACACS+ > Server Configuration
Parameter
TACACS+ Server
Server Address
Priority
Port
Key String
Apply
Connection Timeout
Submit
Remove
102
Click the drop-down menu to select the TACACS+ server for which data is to be
displayed or configured. If the add item is selected, a new TACACS server can be
configured.
Enter the TACACS+ Server IP address or Hostname. Hostnames are composed of
series of labels concatenated with dots. Each label must be between 1 and 63
characters long, and the entire hostname has a maximum of 255 characters.
Enter the order in which the TACACS+ servers are used. Default value is 0. It
should be within the range 0-65535.
Enter the authentication port. Default value is 49. It should be within the range 0-
65535.
Enter the authentication and encryption key for TACACS+ communications
between the device and the TACACS+ server. The valid range is 0-128 characters.
Default is blank. The key must match the encryption used on the TACACS+ server.
Click Apply to submit the key in the Key String field. If the checkbox is not checked,
you will not be able to enter the key. By default its unchecked.
Enter the time to allot the amount of time that passes before the connection
between the device and the TACACS+ server time out. The range is 1 to 30.
Default value is 5. Enter 0 to set it to default value.
Click Submit to update the switch with the values on the screen. If you want the
switch to retain the new values across a power cycle you must perform a save.
Click Remove to delete the selected server from the configuration.
Description