Advantech EKI-9316P Series User Manual page 148

M I
ANAGEMENT NTERFACE
Table 3-87. Switching > Interface Statistics > Interface Detail Statistics (Continued)
Parameter
Total Packets Trans-
mitted (Octets)
Packets Transmitted
64 Octets
Packets Transmitted
65-127 Octets
Packets Transmitted
128-255 Octets
Packets Transmitted
256-511 Octets
Packets Transmitted
512-1023 Octets
Packets Transmitted
1024-1518 Octets
Packets Transmitted
> 1518 Octets
Maximum Frame
Size
Total Packets Trans-
mitted Successfully
Unicast Packets
Transmitted
Multicast Packets
Transmitted
Broadcast Packets
Transmitted
Transmit Packets
Discarded
Total Transmit Errors Displays the sum of Single, Multiple, and Excessive Collisions.
Total Transmit Pack-
ets Discarded
Single Collision
Frames
136
Displays the total number of octets of data (including those in bad packets) trans-
mitted on the network (excluding framing bits but including FCS octets). This object
can be used as a reasonable estimate of ethernet utilization. If greater precision is
desired, the etherStatsPkts and etherStatsOctets objects should be sampled before
and after a common interval.
Displays the total number of transmitted Packets that are 64 octets in length.
Displays the total number of transmitted Packets that are 65 to 127 octets in length
(excluding framing bits, including FCS octets).
Displays the total number of transmitted Packets that are 128 to 255 octets in
length (excluding framing bits, including FCS octets).
Displays the total number of transmitted Packets that are 256 To 511 octets in
length (excluding framing bits, including FCS octets).
Displays the total number of transmitted Packets that are 512 to 1023 octets in
length (excluding framing bits, including FCS octets).
Displays the total number of transmitted Packets that are 1024 to 1518 octets in
length (excluding framing bits, including FCS octets).
Displays the total number of packets transmitted that were longer than 1518 octets
(excluding framing bits, but including FCS octets) and were otherwise well formed.
This counter has a max increment rate of 815 counts per sec at 10 Mb/s.
Displays the maximum ethernet frame size the interface supports or is configured,
including ethernet header, CRC, and payload. 1518 to 9216. The default maximum
frame size is 1518.
Displays the number of frames that have been transmitted by this port to its seg-
ment.
Displays the total number of packets that higher-level protocols requested be trans-
mitted to a sub network-unicast address, including those that were discarded or not
sent.
Displays the total number of packets that higher-level protocols requested be trans-
mitted to a Multicast address, including those that were discarded or not sent.
Displays the total number of packets that higher-level protocols requested be trans-
mitted to the Broadcast address, including those that were discarded or not sent.
Displays the number of outbound packets which were chosen to be discarded even
though no errors had been detected to prevent their being transmitted. One possi-
ble reason for discarding such a packet could be to free up buffer space.
Displays the sum of single collision frames discarded, multiple collision frames dis-
carded, and excessive frames discarded.
Displays the count of the number of successfully transmitted frames on a particular
interface for which transmission is inhibited by exactly one collision.
Description