Upload - Advantech EKI-9316P Series User Manual

M I
ANAGEMENT NTERFACE
Table 3-212. Maintenance > Download (Continued)
Parameter
Server Address
Transfer File Path
Transfer File Name
User Name
Password
Start File Transfer
File Transfer Status
Submit

3.8.5 Upload

The Upload page allows users to upload a file from the switch. To access this page, click
Maintenance > Upload.
266
Enter the IP address of the server in accordance with the format indicated by the
Server Address Type. The factory default is the IPv4 address 0.0.0.0. The switch
remembers the last server address used.
Enter the path on the server where the selected file is located. You may enter up to
160 characters. The factory default is blank. The switch remembers the last file
path used.
Enter the name of the file you want to download from the TFTP/SFTP/SCP/USB
server. You may enter up to 31 characters. The factory default is blank. The switch
remembers the last file name used.
Enter the username for remote login to SFTP/SCP server where the file resides.
This field is visible only when SFTP or SCP transfer modes are selected.
Enter the password for remote login to SFTP/SCP server where the file resides.
This field is visible only when SFTP or SCP transfer modes are selected.
Click Start File Transfer to initiate the download, check this box before pressing
the Submit button.
Click File Transfer Status to the last row of the table is used to display information
about the progress of the file transfer.
Click Submit to update the switch with the values on the screen. If you want the
switch to retain the new values across a power cycle you must perform a save.
Figure 3-216. Maintenance > Upload
Description