Pool Configuration - Advantech EKI-9316P Series User Manual

M I
ANAGEMENT NTERFACE
The following table describes the items in the previous menu.
Table 3-27. Management > DHCP Server > Global Configuration
Parameter
Admin Mode
Ping Packet Count
Conflict Logging
Mode
Bootp Automatic
Mode
Add Excluded Addresses
From
To
Delete Excluded Addresses
Delete
From
To
Submit
Delete

Pool Configuration

The Pool Configuration page allows users to configure settings for existing pools, as well
as create new pools. To access this page, click Management > DHCP Server > Pool
Configuration.
Figure 3-30. Management > DHCP Server > Pool Configuration
68
Click the drop-down menu to enable or disable DHCP service. The default is Dis-
able.
Enter the number (0 or between 2 to 10) of packets a server sends to a pool
address to check. The default is 2. 0 means disable the function.
Click the drop-down menu to enable or disable conflict logging on a DHCP server.
The default is Enable.
Click the drop-down menu to enable or disable Bootp for dynamic pools. The
default is Disable.
Enter an IP address user want to exclude a range of addresses.
Enter an IP address user want to exclude a range of addresses. To exclude a sin-
gle address, enter the same IP address as in From or enter 0.0.0.0.
Check the checkboxes to select the ranges need to be delete.
Enter an IP address user want to exclude a range of addresses.
Enter an IP address user want to exclude a range of addresses. To exclude a sin-
gle address, enter the same IP address as in From or enter 0.0.0.0.
Click Submit to update the screen. To save the values across a power cycle per-
form a system save.
Click Delete to delete the selected row.
Description