Advantech EKI-9316P Series User Manual page 169

Industrial managed 16-port and 12-port full gigabit switch with poe/poe plus
Table of Contents

Advertisement

The following table describes the items in the previous menu.
Table 3-106. Switching > GARP > Global Configuration
Parameter
GVRP Mode
GMRP Mode
Submit
Interface Configuration
The GARP Port Configuration page allows users to configure the mode and timer
settings for each interface. To access this page, click Switching > GARP > Interface
Configuration.
Figure 3-110. Switching > GARP > Interface Configuration
The following table describes the items in the previous menu.
Table 3-107. Switching > GARP > Interface Configuration
Parameter
Interface
Port GVRP Mode
Port GMRP Mode
GARP Timers
Click drop-down to enable or disable the GARP VLAN Registration Protocol admin-
istrative mode for the switch by selecting enable or disable from the pull-down
menu. The factory default is Disable.
Click the drop-down menu to enable or disable the GARP Multicast Registration
Protocol administrative mode for the switch by selecting enable or disable from the
pull-down menu. The factory default is Disable.
Click Submit to update the switch with the values on the screen. If you want the
switch to retain the new values across a power cycle you must perform a save.
Click the drop-down menu to select the physical interface for which data is to be
displayed or configured. It is possible to set the parameters for all ports by selecting
'All'.
Click the drop-down menu to enable or disable the GARP VLAN Registration Pro-
tocol administrative mode for the port by selecting enable or disable from the pull-
down menu. If you select disable, the protocol will not be active and the Join Time,
Leave Time and Leave All Time will have no effect. The factory default is Disable.
Click the drop-down menu to enable or disable the GARP Multicast Registration
Protocol administrative mode for the port by selecting enable or disable from the
pull-down menu. If you select disable, the protocol will not be active, and Join Time,
Leave Time and Leave All Time have no effect. The factory default is Disable.
M
ANAGEMENT
Description
Description
I
NTERFACE
157

Advertisement

Table of Contents
loading

This manual is also suitable for:

Eki-9312p series

Table of Contents