Table of Contents
Advertisement
The following table describes the items in the previous menu.
Table 3-98. Switching > VLAN Setting > IP Subnet-based VLAN > Status
Parameter
IP Address
Subnet Mask
VLAN ID
Refresh
MAC-based VLAN
Configuration
The MAC-based VLAN Configuration allows users to configure MAC address and VLAN ID.
To access this page, click Switching > VLAN Setting > MAC-based VLAN >
Configuration.
Figure 3-102. Switching > VLAN Setting > MAC-based VLAN >
Configuration The following table describes the items in the previous menu.
Table 3-99. Switching > VLAN Setting > MAC-based VLAN > Configuration
Parameter
MAC Address
Click the drop-down menu to select the MAC Address bound to a VLAN. To add
another MAC VLAN entry, select "Add" option.
MAC Address
Enter the MAC address which is to be bound to a VLAN ID. This field is configurable
only when a MAC-based VLAN is created.
VLAN
Enter a value for a VLAN ID: range 1 to 4093.
Submit
Click Submit to update the switch with the values on the screen. If you want the switch
to retain the new values across a power cycle you must perform a save.
Delete
Click Delete to remove an entry of MAC Address to VLAN mapping.
Displays the IP Address of the subnet that is being bound to a VLAN ID.
Displays the subnet mask of the IP Address bound to VLAN ID.
Displays the VLAN ID to which above mentioned IP Subnet is being bound to.
VLAN ID can be any number in the range of 1 to 4093.
Click Refresh to update the data on the screen with the present state of the data in
the switch.
M
Description
Description
I
ANAGEMENT
NTERFACE
151
Advertisement
Table of Contents
